Mathews Bridge-Lock LowPro Quiver (2023): Quiver Design Built Around the Bridge-Lock Ecosystem

A quiver attached to a compound bow is a loaded mass sitting offset from the bow's balance axis. Load it with four broadhead-tipped arrows and the offset weight is significant — enough to measurably shift where the bow wants to balance under aim and to add torque around the bow's vertical axis that doesn't exist when the quiver is empty. Most hunters accept this as the cost of not wearing a back quiver, and most quiver manufacturers design to minimize the effect. Mathews built the Bridge-Lock system to address the mount quality side of the problem first, and the LowPro Quiver takes the next step by reducing the offset.

What's notable

The Bridge-Lock mount on current Mathews hunting bows replaces the standard threaded stabilizer boss with a sliding channel system machined directly into the riser face. Accessories designed for Bridge-Lock — including this quiver — attach via a locking slider that engages two parallel rails, producing a connection with dramatically less rotational play than a threaded interface. A threaded stabilizer boss under load develops measurable play over time, particularly when a heavy accessory like a filled quiver is creating a moment arm on the connection. Bridge-Lock eliminates that play at the design level rather than trying to torque a thread tight enough to prevent it.

The LowPro designation describes the quiver's position relative to the bow's centerline. By positioning the arrow tubes lower and closer to the riser face than a conventional high-mount side quiver, Mathews reduces the lateral distance between the quiver's center of mass and the bow's vertical balance axis. Less lateral offset means less torque on the riser when the quiver is loaded, which means less compensatory pressure the archer's grip hand needs to apply to keep the bow from rotating toward the quiver side. The effect is most noticeable when you remove the quiver after hunting — the bow suddenly feels noticeably less side-heavy, which tells you how much torque the quiver was contributing with a conventional mount.

The arrow gripper accommodates standard diameter hunting arrows with broadheads up to most current expandable and fixed-blade designs. The protective hood over the broadhead tips prevents contact between sharp blade surfaces and the string, cables, or limbs during carry — a safety and equipment protection feature that matters on any quiver design. Capacity runs four to five arrows depending on arrow diameter, which covers most hunting situations. The quiver detaches from the Bridge-Lock slider without tools, so it can be removed when not needed and stored separately.

Who it's for

The Bridge-Lock LowPro Quiver is for Mathews bow owners specifically — the Bridge-Lock mount is proprietary to current Mathews platforms, and the quiver won't attach to conventional threaded bosses without an adapter that partially defeats the mount's precision advantage. For hunters already running a current Mathews hunting bow with Bridge-Lock, it's the cleanest integration on the market: no shimming, no wobble, no play that develops over a season of use. The torque reduction from the LowPro positioning is an additional benefit that conventional side-mount quivers can't replicate regardless of mount quality.

Hunters running non-Mathews bows or older Mathews models without Bridge-Lock should look at conventional quiver options from Tight Spot, Bohning, or similar. The Bridge-Lock system's advantages only exist when you have the matching mounting rails built into the riser.

Where it sits in the lineup

The Bridge-Lock LowPro Quiver is part of Mathews' 2023 Bridge-Lock accessory ecosystem, which also includes stabilizers, sights, and other accessories designed for the same mounting system. Mathews has been developing the Bridge-Lock platform as an integrated upgrade argument across multiple product generations — buy the bow, run the matched accessories, and get the system-level benefits. The quiver retails at a modest premium over comparable side-mount quivers from third-party manufacturers, which is justified by the mount quality and offset geometry for hunters who are already in the Bridge-Lock ecosystem.

Quiver vibration at the shot is reduced by the Bridge-Lock attachment's rigidity compared to threaded connections that flex and buzz under vibration. Hunters who have experienced a quiver rattling or buzzing when the bow fires — producing a sound that can spook nearby game — often find that the issue disappears entirely when switching to a rigid-mount quiver system like the Bridge-Lock, since the cause is typically play in the threaded connection rather than the quiver body itself.

One underappreciated advantage of the LowPro quiver's position relative to the riser is improved clearance during the shot. A quiver mounted high and outboard on a conventional side-mount sits closer to the bow's sight window, where arrow fletching from the quiver can occasionally contact string, cables, or sight housing on certain shot angles. The LowPro's positioning moves the quiver away from these components, reducing the risk of inadvertent contact during a rushed or awkward hunting shot.

Source

Product data sourced from manufacturer specifications and Mathews product documentation.

Tagged: Stabilizers · Mathews · 2023